Carbon Concord
Carbon-Concord aims to cut down carbon emissions and enhance social and economic wellbeing through a cross-sectorial approach. It is a joint effort among various stakeholders, including governments, businesses, non-profits, and communities. Carbon-Concord targets a net-zero carbon economy by 2050, using a combination of techniques like renewable energy sources, transportation electrification, energy efficiency, and carbon capture and storage. Carbon-Concord recognizes the gravity of carbon emissions and how it negatively impacts the environment, climate, and human health. Shifting to cleaner energy sources creates new job opportunities while reducing carbon footprints. Through energy efficiency, the initiative aims to minimize energy waste in homes, industries, and buildings. Additionally, Carbon-Concord proposes storing carbon emissions underground, amongst other strategies. Carbon-Concord encourages sustainable agriculture, increasing forestation, and promoting circular economic principles to reduce waste and recycle resources. Therefore, Carbon-Concord is a crucial initiative for limiting carbon emissions and enhancing social and economic welfare.
Quantity and packing
Quantity: According to the Agreement
Packing: Small bags of 25 kg
Loading Ability: 27-28 MT in 40 HC
Validity: 15 Days
Payment: By T/T 50% deposit, balance against the mass production finished.
PRODUCT SPECIFICATIONS:
| S. No. | Test Parameter | Specifications | Standards |
| 1.0 | CTC, % | 60 min | ASTM D3467 |
| 2.0 | Iodine Adsorption, mg/g | 1150 min | ASTM D4607 |
| 3.0 | Ash, % | 4 max | ASTM D2866 |
| 4.0 | Moisture, % as packed | Not more than 5% w/w | ASTM D2867 |
| 5.0 | Hardness No | 98 min | ASTM D3802 |
| 6.0 | Apparent Density, kg/m3 | 480 – 530 | ASTM D2854 |
| 7.0 | Platlets (A.A.R.L),% | 5 max | AARL |
| 8.0 | Attrition (A.A.R.L),% | 1.2 max | AARL |
| 9.0 | Mesh Size (US Sieve Series) Greater than 6 mesh (3.35 mm), % Less than 12 mesh (1.7 mm), % | 5 max 3 max | ASTM D2862 |
*Typical Properties: Isotherm K Value min 24 mg Au/g, R-Value 65% (AARL Method)
Carbon Adsorbent Packaging/Transportation of
Standard Packaging in 500 Kg Jumbo Bags / 25 Kg PP Bag with Inner Liner
Customized Packaging available on demand
Activated Carbon (NOT REGULATED)
Exempt from DOT, IATA & IMDG Regulations
Import/Export Classification: 3802.10.0000 (HS Tariff Classification)
Freight Classification: NMFC 040560
CAS # 7440-44-0
Carbon Catalysts Material Handling of
In view of the fact that wet activated carbon depletes oxygen from the air, it is critical to avoid direct body exposure and prevent contact with your skin or eyes to maintain good hygiene. Moreover, the depletion of oxygen levels in the air could result in dangerously low oxygen levels, thereby increasing the potential health risks. It is important to note that, as additional safety measures, one should take necessary precautions when handling activated carbon to prevent any adverse health effects.
To minimize the risk of injury, it is important to take precautions when handling this material. Firstly, be careful not to let it come into contact with your eyes, and if this occurs, flush them immediately with water. Secondly, avoid prolonged or repeated skin contact with this material and wash your skin thoroughly after handling it. Thirdly, it is important to avoid the formation of airborne dust, so handle the material with caution and care. Lastly, make sure that you wear appropriate protective equipment to protect yourself from the harmful effects of this material. Furthermore, it is imperative to note that long-term inhalation of high dust concentration could lead to respiratory impairment, hence the need to exercise caution while handling this material.
